OM9380ZS100 is designed for 80 km optical communication applications. This module contains 2-lane optical transmitter, 2-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC co...

OM9658LS100 is a transceiver module designed for 10 km optical communication applications, and it is compliant with 100G Lambda MSA standard. This module can convert 8-channel 53.125 Gbps electrical data to 4-channel 106.25 Gbps optical signals, and multiplex them into a single channel for 425 Gbps ...

OM9658LD100 is an optical module that supports two application scenarios: 400GE and FLEXO. In the 400GE scenario, it can transmit 10 km and comply with the 100G Lambda MSA standard. In the FLEXO scenario, it can transmit 6 km and comply with the ITU-T G.695 standard. This module can convert 8-channe...

OM3358FX100 is a QSFP+ transceiver module designed for 2 km optical communication applications with single mode fiber. It is compliant with IEEE 802.3-2018 40GBASE-LR4 (partly compliant), IEEE 802.3-2018 Annex 86A, QSFP+ MSA standards. Digital diagnostic management interface (DDMI) is realized by I2...

OM3358LX100 is a QSFP+ transceiver module designed for 10 km optical communication applications with single mode fiber. It is compliant with IEEE 802.3-2018 40GBASE-LR4, IEEE 802.3-2018 Annex 86A, QSFP+ MSA standards. Digital diagnostic management interface (DDMI) is realized by I2C interface in com...

OM3358SX100 is a QSFP+ transceiver module designed for 2 km SM Fiber or 150 m OM3/OM4 MM fiber optical communication applications. It is compliant with IEEE 802.3-2018 40GBASE-LR4 (partly compliant), IEEE 802.3-2018 Annex 86A, QSFP+ MSA standards. Digital diagnostic management interface (DDMI) is re...

OM3559CX100 is a QSFP28 transceiver module designed for 2 km optical communication applications with single mode fiber. It is compliant with 100GE CWDM4 MSA, QSFP28 MSA, IEEE 802.3bm Annex 83E and OIF CEI-28G-VSR standards. Digital diagnostic management interface (DDMI) is realized by I2C interface ...

OM3538SX101 is a parallel full-duplex 100GE Quad Small Form-factor Pluggable (QSFP28) transceiver designed for short-range multi-lane data communication. It offers four independent data lanes based on 850 nm VCSEL/PD array technology, and each lane is capable of 25GE operation for an aggregate data ...

OM3558SX101 is a QSFP28 transceiver module designed for 70/100m OM3/OM4 MM fiber optical communication applications. It is compliant with IEEE 802.3 bm-2015, QSFP28 MSA standards. Digital diagnostic management interface (DDMI) is realized by I2C interface in compliance with SFF-8636....

OM3680SX200 is a parallel 400GE Quad Small Form Factor Pluggable Double Density (QSFP-DD) SR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 400 Gigabit Ethernet li...

OM3660FX102 is a transceiver module designed for 2 km optical communication applications, and it is compliant with 100G Lambda MSA standard. This module can convert 8-channel 53.125 Gbps electrical data to 4-channel 106.25 Gbps optical signals, and multiplex them into a single channel for 425 Gbps o...

OM3887SX101 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) VR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pai...