Communication Products

Optical Transceivers · Telecom Synchronization · Network Infrastructure · Custom Solutions

Home > Products > Network Infrastructure Products > Backward-Pumped Raman Amplifier – APX-RAMAN-B
Network Infrastructure Products

Backward-Pumped Raman Amplifier – APX-RAMAN-B

Backward-Pumped Raman Amplifier – APX-RAMAN-BProduct OverviewThe Apex APX-RAMAN-B is a backward-pumped Raman amplifier that adds distributed gain directly in the transmission fiber. Its low noise figu
Raman amplifier backward pumped Raman distributed Raman amplifier Raman amplifier module OSNR improvement long haul amplification Raman pump DWDM Raman amplifier

Backward-Pumped Raman Amplifier – APX-RAMAN-B

Product Overview

The Apex APX-RAMAN-B is a backward-pumped Raman amplifier that adds distributed gain directly in the transmission fiber. Its low noise figure improves optical signal-to-noise ratio on long SDH and DWDM routes and raises the practical distance between regeneration points.

Key Features

  • Backward-pumped Raman amplification for improved OSNR
  • Raman design combines high gain with low power consumption

Technical Specifications

SpecificationDetail
Part NumberAPX-RAMAN-B
BrandApex
Amplifier TypeSingle-stage C-band EDFA; backward-pumped Raman amplifier
Operating Wavelength1529–1561nm (EDFA, C-band)
Gain Options15dB / 20dB / 25dB
Channel Gain10–20dB (15/20dB models); 15–25dB (25dB model)
Input Power Range (15dB)-26 to +6dBm
Input Power Range (20dB)-31 to -1dBm
Input Power Range (25dB)-32 to -4dBm
Maximum Output Power16dBm
Noise Figure<5.5dB to <6.5dB
Raman PumpingBackward-pumped
ProtectionAutomatic shutdown protection

Available Configurations

APX-RAMAN-B

The backward Raman amplifier is deployed ahead of an EDFA stage to lift OSNR on long SDH and DWDM routes, turning marginal spans into reliable links without a new regeneration site.

Applications

🔌 Compensating Optical Component and Fiber Loss

Restores power consumed by multiplexers, splitters, OADM modules and fiber spans so downstream receivers stay within their operating window.

🌐 Extending DWDM Reach

Pushes DWDM wavelengths further across metro and regional networks, reducing the number of electrical regeneration points on a route.

🛰️ Long-Haul SDH and DWDM OSNR Improvement

Backward Raman amplification lifts optical signal-to-noise ratio on long spans, improving margin for high-order modulation and dense channel plans.

Compatibility

Interoperable with major optical transport and networking platforms. Standard C-band gain blocks and backward Raman pumping integrate into existing DWDM, SDH and OTN transport without changes to the line system.

Frequently Asked Questions

When is the Raman amplifier used?

The backward Raman amplifier is used on long SDH and DWDM routes to improve OSNR and gain extra reach, often combined with an EDFA stage.

Why Choose Apex

  • Three EDFA gain classes cover short metro add-drop points and long weak-signal spans
  • Backward Raman amplification adds reach and OSNR margin without a new regeneration site
  • Low noise figure supports dense DWDM channel plans and high-order modulation
  • Engineering support for span budgeting and amplifier placement