The CFP2-DCO 200G/100G coherent module utilizes a trio of indium phosphide (InP) based PICs, covering the laser, modulation, and receiver functions. Through integration, we have enabled almost complete on-wafer test of our PICs....

The CFP2-DCO 200G/100G coherent module utilizes a trio of indium phosphide (InP) based PICs, covering the laser, modulation, and receiver functions. Through integration, we have enabled almost complete on-wafer test of our PICs....

Single 1x9 WSS module is designed for colorless, directionless, flexgrid ROADM applications. This module contains one common port and nine Mux/Demux ports, supports dynamically routing and attenuating single/multiple chanel to any port. The functionality of the WSS is optically bi-directional....

OM3887SX101 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) VR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pai...

OM3887SX100 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) SR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pai...

OM3877FX200 is a transceiver module designed for use in 800 Gigabit links on up to 2 km. It is well-suited for applications in data centers and cloud networks. It is compliant with 100G Lambda MSA standard and CMIS 5.2. Digital diagnostic functions are available via the I2C interface. This module ca...

OM3887SX101 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) VR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pai...

OM3887SX100 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) SR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pai...

OM3877FX200 is a transceiver module designed for use in 800 Gigabit links on up to 2 km. It is well-suited for applications in data centers and cloud networks. It is compliant with 100G Lambda MSA standard and CMIS 5.2. Digital diagnostic functions are available via the I2C interface. This module ca...

OM8769XX200 is intended to be used on the host board of system integrators to support transmission over DWDM links in Metro networks. It comprises high-data lanes, a single reference clock from hosts, a single 3.3 V power supply, an MDIO interface, and dedicated alarm and control pins. The module us...

OM8568XX100 module uses a 148-pin OIF MSA connector for all electrical interfaces with the host card, whereas the optical interfaces on the line side are provided through the optical receptacles on the CFP....

OM9758ES100 module is designed for 40 km optical communication applications, and it is compliant with IEEE 802.3cn for 200GE Ethernet. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are mult...