APEX 1300W Titanium Server Power Supply
1U hot-pluggable, N+1 redundant, PMBus-enabled PSU for enterprise servers and edge data centers. Titanium efficiency with cold redundancy and in-system firmware management.
The APEX 1300W Titanium is a 1U, hot-pluggable server power supply engineered for enterprise server platforms, edge data centers, and converged infrastructure. Delivering 1300W of output with 80Plus Titanium efficiency, it features the same advanced digital management as the 2000W model — PMBus 1.2 telemetry, cold redundancy, in-system firmware update, and black box fault recording — in a cost-optimized 1300W power envelope ideal for mainstream deployment.
1300W
MAX OUTPUT
96%
PEAK EFFICIENCY
1U
FORM FACTOR
Titanium
80PLUS RATING
| Input | |
|---|---|
| Voltage Range (AC) | 90–264 VAC (100–240 V nominal) |
| Voltage Range (DC) | 180–320 VDC |
| Frequency | 47–63 Hz |
| Max Current | ≤6.5 A @ 100 VAC |
| Inrush Current | ≤ 35 A (cold start, peak) |
| Power Factor | >0.90 @ 10% / >0.96 @ 20% / >0.98 @ 50% / >0.99 @ 100% |
| Hold-up Time | ≥11 ms @ 70% load / ≥70 ms (+12Vsb) |
| Input Connector | IEC 320 C-20, 16A/250VAC |
| Output | |
| Main Rail | +12 V, 108 A (1300 W max) |
| Standby Rail | +12 Vsb, 3 A (36 W max) |
| Voltage Regulation | +12 V: ±5% |
| Ripple & Noise | ≤ 120 mVp-p |
| Efficiency (80Plus Titanium) | |
| 10% Load | ≥ 90% |
| 20% Load | ≥ 94% |
| 50% Load | ≥ 96% |
| 100% Load | ≥ 91% |
| Protection | |
| OCP / OVP / UVP / SCP / OTP | Full protection suite on all rails |
Real-time input/output telemetry. STATUS commands with SMBAlert# fault signaling. PEC error checking per SMBus 2.0.
CR_BUS inter-PSU communication. Dynamic standby/wake based on load. 1+1, 2+2, 3+1 configurations. Load-share threshold optimization per slot position.
Boot loader + main program dual-bank. BMC-driven update via PMBus. Bad-image recovery guaranteed.
NV event log: PMBus snapshot, system tracking data, real-time clock at fault. Accessible via 12Vsb — no AC required.
IPMI 1.0 compliant. Manufacturer, model, serial, power ratings. Multi-record area for DC output and PSU info.
Operating: 0–50 °C. Storage: –40 to +70 °C. Humidity: 5–95% RH. Altitude: up to 5000 m.
